Nuoxin Tianpeng (Tianjin) Technology Co., Ltd. provides Tianjin welding machine, Tianjin laser welding machine, wire filling welding machine and other relevant information release and information display for you free. Please pay attention!  

How to choose fiber laser cutting machine

Source:  Release Time : 2021-12-15

How to choose fiber cutting .com>

When purchasing a fiber cutting .com>, be sure to look at the cutting fineness, which can basically be controlled between 0.1 mm and 0.2 mm. In the actual cutting process, the smoothness of the cutting surface is also very important. It is necessary to see if there are some burrs on the cutting surface. Generally speaking, there will be some burrs, which are basically determined by the thickness of the cutting or the use of It is determined by the gas, and there is no burr below three millimeters. The gas is nitrogen is better, and the effect of oxygen is second. If it is air, the effect is also poor.

Fiber cutting .com> has certain selection criteria in the whole selection process. If you choose this kind of equipment, you must determine the production range, and you must make an effective selection according to the processing material or the thickness of the cutting. Only in this way can you determine The quantity of the purchased equipment or the relevant .com> model will make a good preparation for the subsequent purchase work. The professional fiber cutting .com> has relatively few burrs, and it can even be said that there are no burrs, and the cutting surface is very smooth. Most manufacturers have their own power requirements for cutting .com>s and other equipment. From the existing situation, most of the factories also cut metal sheets below 6 mm, so there is no need to buy high-power cutting .com>s. Depending on the degree of deformation of the material, if a fiber cutting .com> is used for cutting, the material deformation effect of good equipment is very small.

Related tags: